Home > Mouse Not > Usb Mouse Not Working Windows Vista

Usb Mouse Not Working Windows Vista

Contents

This may occur because Windows Vista does not detect that the USB audio device was removed, and is still trying to send audio from, or to, the unplugged device. Error: Activation failure of BIOS USB Enable Legacy USB Support in the Basic Input/Output System (BIOS) by using the steps listed in Important information about Legacy USB Support. hard drive crapped out on me recently too... Open "My Computer" and go to the following location C:\windows\system32\drivers. 2. http://admitcore.net/mouse-not/usb-mouse-not-working-on-windows-vista.html

Of course, the usual way to solve it will be used, like restarting in Safe Mode and doing a System Restore, or by going to the Windows Boot Manager and trying Use the following steps to enable or disable USB Legacy Support on the computer: Turn on or restart the computer. Friday, April 11, 2008 2:54 PM 0 Sign in to vote Vais ao Painel control / sistema / gestor de dispositivos Em seguida abre o  gestor de dispositivos de interface humana Just go to device manager --> HID-devices --> Unknown Device and search for drivers. http://www.tomshardware.com/forum/237979-44-mouse-working-vista

Mouse Not Working On Laptop

USB device not detected by Windows Perform the following steps to troubleshoot the USB port when the computer does not detect a USB device: Check Device Manager to see if the All has been well for the last four months since i bought it, but just the other day - it completely stopped working on me. why?

The device should now work properly. Perhaps it missed you, and is now sulking? The available ports and power usage is shown. Ps2 Mouse Now I have to use firewire which works fine, however, I don't even get a messasge when I plug my camera in via USB, Vista just completely ignores it.

How come? Mouse Not Detected If you are using the PS/2 or USB port on the back of the computer, the motherboard is likely bad and needs to be replaced. For more information, see the HP Support document Using Recovery Manager to Restore Software and Drivers (Windows 7). https://channel9.msdn.com/Forums/Coffeehouse/254439-Why-cant-I-plug-in-a-USB-mouse-in-Vista My Cosigner is going to die, and the family is threatening to take the car!

Friday, November 06, 2009 9:34 AM 0 Sign in to vote Hi -Dr-I just want to thank you for the advice, same thing happened here, took your advice, and all is Logitech Mouse Driver Reboot the computer to resolve this issue. HP Customer Support Support Home Products Software and Drivers Forums Contact Support Search Select your Model Let HP find my products Identify now HP can identify most HP products and recommend This should help in every Windows Vista build, except for the Windows Vista Ultimate build.

Mouse Not Detected

The following steps explain how to properly eject memory cards from a card reader: Insert a memory card when the light on the reader is not flashing. http://www.computerhope.com/issues/ch000254.htm All rights reserved.Newsletter|Contact Us|Privacy Statement|Terms of Use|Trademarks|Site Feedback Why can't I plug in a USB mouse in Vista? | Coffeehouse | Forums | Channel 9 Channel 9 Site Navigation All Content Mouse Not Working On Laptop Maybe there is a problem with the power setting of the hub. Mouse And Keyboard Not Working Now shut down the computer, and start it up again.

So that Windows would register these two devices again, now on different ports. navigate here FOLLOW US Twitter Facebook Google+ RSS Feed Disclaimer: Most of the pages on the internet include affiliate links, including some on this site. Reports: · Posted 8 years ago Top Codie-lyn Posts: 18 This post has been reported. went outside for a min. Windows Vista Mouse Cursor Frozen

I've just bought a new Microsoft Intellimouse Optical 1.1A USB/ PS/2. Device Name Displays - If the name of the device is shown, the USB port is working properly. Ta da! http://admitcore.net/mouse-not/usb-mouse-not-working-in-vista.html Make sure the wireless receiver is within range and is not blocked by another object.

Figure : Bottom of the optical mouse Clean the LED bulb and the surrounding area on the bottom of the mouse with a cotton swab dampened with isopropyl alchohol. thank u very muchi hope ms would check the updates b4 releasing them Tuesday, December 02, 2008 10:45 AM 0 Sign in to vote  Hi Folks this is the resoultion for drive) into that usb port (to check if it is a mouse or port problem) Reports: · Posted 8 years ago Top Codie-lyn Posts: 18 This post has been

The location of this driver (in most cases) will be C:/Windows/Winsxs.

came back and it didn't work anymore..? For Vista Ultimate, the success of this method is not guaranteed, although there are still chances of this working depending on the hardware you have. Sunday, March 08, 2009 8:45 PM 0 Sign in to vote Thank you for your input, Drnitro: I followed your directions, to some extent... (go to device manager-->USB Trackball-->Update driver by searching on Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories Chart For IT Pros Get IT Center Brands Tutorials Other sites Tom's Guide Tom's

Try using Task Manager to turn off unneeded tasks. Short version for future visitors: Try the following... Select the correct operating system. http://admitcore.net/mouse-not/usb-port-mouse-not-working-vista.html Select your computer model.

The mouse worked for me (even without reboot).   OS: Vista Home Premium 64-bit.   -Dr- Saturday, April 12, 2008 12:10 PM 0 Sign in to vote Hi everyone:I had the Before using the following steps make sure a PS/2 mouse and keyboard is plugged in to the computer. Today  I received update KB938371 (and a few more, but they don't cause any problems).   After restarting the system, the updates are fully installed. Use the Left and Right arrow keys to select the Advanced tab.

Corrupt operating system files If all of the above solutions do not resolve the issue, there is a possibility of corrupt system files in the operating system. When the installing is complete, check again, and the driver should work. ◄●●●●●●●► We Also Recommend... When i plug the ipod in, it seems to be charging, but my computer does not pic it up, either as a storage deice nor in itunes. ??? Then, if the issue continues, refer to the HP support document Wireless Keyboard and Mouse Troubleshooting for further troubleshooting.

Reconnect the USB device that was having problems and test it to see if it works. I unplug the mouse alone and plug it back in, I go to the Device Manager and I see that both the keyboard and the mouse are recognized by Windows. Expand the "Universal Serial Bus Controllers" and then right click on each one in turn, selecting "Properties" each time. If a driver is installed for the mouse, it is recommended that you check if there is an updated driver for the mouse.

Select your language and operating system. My Digital Cam Corder doesn't work with vista using USB either, it used to with XP. After a while this window pops up: Finally everything settles down to this: Moving the mouse does nothing, and oddly the "installing new hardware" icon in the system tray is stays Use the Up, Down, and Enter keys to select Enabled or Disabled and Enter.

A freezing mouse (mouse arrest?{ is a recurring problem in Windows Vista. You can also refer to the motherboard specification that matches your specific model of computer. Use the memory card as you would use any other drive on the computer. For instructions on how to use Microsoft System Restore, refer to one of the following HP support documents that applies to your computer and version of Windows: Using Microsoft System Restore

To resolve this problem, close Windows Media Player 11, and then open it again. Figure : Device Manager: Updating USB Host Controller Follow the screens that open to find and install any available updates through Microsoft. and the oly other thing I have right now to go into a usb is my ipod..

© Copyright 2017 admitcore.net. All rights reserved.